TP Test Piece Replicates Joint Hardness
DTF Drill Chuck
TTF Table (Requires Fixture ATF)
| |
Technical specification | Model | Torque Range | Adapting Model | Inlet | Dimension in | Weight Approx. | | Min. ~ Max. | Opposite Size | Small Screw | Diameter | Height | | S.I. | Metric | American | mm | mm | in | mm | in | kg | lbs. | | TP2.5N | N.m
0.25-2.5 | kgf.cm
2.5-25 | in.lbs
2-22 | TCF02N - TCF4N | 8 | M4 | 18 | 23/32 | 58 | 2 5/8 | 0.08 | 5/32 | | TP18N | 1.8-18 | 18-180 | 16-160 | TCF10N,TCF20N | 13 | M6 | 35 | 1 3/8 | 83.5 | 3 7/16 | 0.27 | 21/32 | | TP180N | 18-180 | 180-1800 | ft.lbs
30-130 | TCF100N, TCF200N | 24 | - | 65 | 2 9/16 | 148 | 5 13/16 | 1.9 | 4 5/8 | | TP1800N | 180-1800 | 1800-18000 | 130-1300 | TCF1000N, TCF2000N | 50 | 140 | 5 1/2 | 297.5 | 11 23/32 | 16.8 | 36 1/8 | | Model | Adapting Model | Chuck Grip | Dimension | | mm | in | Diameter | Height | | DTF5-3 | TCF02N-TCF4N | Max 5 | Max 1/8 | 33 mm | 1 5/16 in | 65 mm | 2 9/16 in | | DTF5-2 | TCF10N-TCF40N | 61 mm | 2 3/8 in | | Model | Adapting Model | Chuck Grip | Diameter | | Model | Attachment | mm | in | mm | in | | TTF7 | ATF18-2 | TCF02N ~ TCF4N | Ø10 ~ 70 | 13/32 ~ 2 3/4 | 70 | 2 3/4 | | TTF11 | Ø14 ~ 110 | 9/16 ~ 4 11/32 | 110 | 4 11/32 | | ATF180 | TCF10N,TCF20N | | TTF19 | ATF18-2 | TCF2N-TCF4N | Ø18 ~ 190 | 23/32-7 15/32 | 180 | 7 3/32 | | ATF180 | TCF10N-TCF20N |
|
© Modern Traders, Mumbai. All Rights Reserved (Terms of Use)
TP/TTF/DTF+ATF